Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 3-33 P/N 196515 (Revision A)
Lesson 3-7
Cleaning and Replacing Conveyor Belts
A. Introduction
Checking the condition of the conveyor belts should be a part of the routine
maintenance schedule of the dispensing system.
B. Enabling Objective
3.7 Perform the procedure to clean and replace the conveyor belts.
C. Topic Outline
1. Introduction
2. Overview
 Conveyor Belt Maintenance
 Cleaning the Belts
3. Summary and Review
To Next Page
Loading...
Need help?
General