Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 2-135 P/N 196515 (Revision A)
Lesson 2-15
Board Sensors
A. Introduction
Board sensors are sensors located along the length of the conveyor rail that
detect the presence of a board or part. Board sensors should be adjusted after
initial installation and when the sensors are failing to sense the presence of a
board.
B. Enabling Objective
2.15 Perform the procedure to adjust board sensors.
C. Topic Outline
1. Introduction
2. Overview
 Board Sensors
 Upward Facing Sensors
 Downward Facing Sensors
 Sensitivity Adjustments
3. Summary and Review
To Next Page
Loading...
Need help?
General