Nordson Asymtek X-1000 Series - Lesson 4-3 Testing the I;O Functions of the Dispenser and Conveyor

Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 4-29 P/N 196515 (Revision A)
Lesson 4-3
Testing the I/O Functions of the Dispenser and Conveyor
A. Introduction
When troubleshooting the dispensing system, it may be necessary to test the
input and output (I/0) functions of the Dispenser and Conveyor.
B. Enabling Objectives
4.3 Perform procedure to list and test the I/O functions of the Dispenser and
Conveyor.
C. Topic Outline
1. Introduction
2. Overview
 Testing I/O Functions
 Conveyor I/O Test
 Dispenser I/O Test
3. Summary and Review