Training Guide Course No. 196514
Level 2 Maintenance, X-1000 Series Dispensing Systems 1-6 P/N 196515 (Revision A)
Table 1-2-1
Safety Warning Labels
Symbol
Warning Type
Hazard
Electrical
(Shock Hazard)
This label warns of a high-voltage component that
can cause shock, burn, or death. Use extreme
caution when working in or around these areas.
Disconnect and lock out power before servicing.
Hot Surface
(Thermal
Hazard)
This label warns of a potentially hot component or
surface that can cause severe burns.
Disconnect and lock out power before servicing.
Use thermal protection or allow heaters to cool
before performing service or maintenance in these
areas.
Fuse
(Fire Hazard)
This label warns of a fuse requirement that, if not
met, can cause fire or severe damage to the
equipment.
For protection against risk of fire, replace a fuse with
one having the same type and current rating.
Disconnect and lock out power before servicing.
Heavy Object
(Lifting Hazard)
This label warns that the labeled component is
heavy and can cause muscle strain or back injury to
personnel trying to lift it.
Refer to “Lifting and Transport Precautions” in this
section for additional information.
To Next Page
Loading...
Need help?
General