226
Advanced operations
15
Remove the ink amount extension chip from
the ink chip reader.
16
Push
Close
Close the cover of the ink chip reader.
17
INSERT EXT. CHIP
PRESS CANCEL TO QUIT
>INK AMT EXTENSION
2
READ EXT. CHIP
If you have finished reading ink amount extension chip,
press the CANCEL button.
To read another ink amount extension chip, perform the
steps
8
to
16
of this procedure again.
Note
The following message is displayed if the ink amount extension has failed.
<When the read chip has already been used>
OPERATION FAILED
ALREADY USED CHIP
(Solution)
Read an ink amount extension chip that has not been used
with the printer.
<When the read chip is not supported by the printer>
OPERATION FAILED
INCORRECT INK TYPE
(Solution)
Read an ink amount extension chip that has been supplied
with the ink bottles for this printer.
<When the read chip is not an ink amount extension chip>
OPERATION FAILED
UNKNOWN CHIP
(Solution)
Read an ink amount extension chip that has been supplied
with the ink bottles for this printer.
<When the chip could not be read>
OPERATION FAILED
UNABLE TO READ CHIP
(Solution)
Ask your dealer or a service representative.
Or read another ink amount extension chip.
To Next Page
Loading...
