Monitors and Cameras
Polycom, Inc. 3–7
Display Near Video
Display Far Video
Display Content
Polycom HDX 9006
Polycom HDX 9004
Polycom HDX 9002
Polycom HDX 9001
Polycom HDX 8000 HD
Polycom HDX 7000 HD
Polycom HDX 7000
Polycom HDX 4000 HD
Polycom HDX 4000
Specifies whether to display near video, far video, and
content on this monitor.
Monitor 3 (VCR/DVD)
Polycom HDX 9006
Polycom HDX 9004
Polycom HDX 9002
Polycom HDX 9001
Polycom HDX 8000 HD
Polycom HDX 7000 HD w/
Hardware Versions A,B,C
Polycom HDX 7000
Specifies the aspect ratio for recording.
•Off — Select if you do not have a VCR or DVD
player connected to record video conferences.
•4:3 — Select to record for playback on a standard
monitor.
•16:9—Select to record for playback on a
wide-screen monitor, if your recording device has
this capability.
Note (Polycom HDX 9006, Polycom HDX 8000 series,
and Polycom HDX 7000 series systems): The video
format and resolution of Monitor 1 and Monitor 2 affect
the output sent to Monitor 3, as follows:
• When Monitor 1 and Monitor 2 are both on and are
both set to VGA (1920 x 1080 or 1280 x 720), DVI
(1920 x 1080 or 1280 x 720), or Component (NTSC
only), you can choose either Monitor 1 Image or
Monitor 2 Image as the output to Monitor 3
(VCR/DVD).
• When Monitor 1 and Monitor 2 are both on but only
one of them is set to VGA (1920 x 1080 or 1280 x
720), DVI (1920 x 1080 or 1280 x 720), or
Component (NTSC only), the output to Monitor 3
(VCR/DVD) is set to the image from that monitor.
• When Monitor 1 and Monitor 2 are both on but
neither is set to VGA (1920 x 1080 or 1280 x 720),
DVI (1920 x 1080 or 1280 x 720), or Component,
Monitor 3 is disabled.
• If Monitor 2 is disabled, Monitor 3 is fully
configurable and independent of Monitor 1.
Setting Description
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
