System Commands
Polycom, Inc. 122
address Obtains the address information for a specified
entry. If the entry is an ITP system, the results
will include the addresses for all codecs. If
codecs support multiple protocols, the different
addresses will be returned on separate lines.
This command is not supported for multisite
entries.
✓
sys_name The friendly name for an address book entry. It
is the name of the person or the room. It is
surrounded by quotes if it contains spaces.
✓
sys_label If a person/room has more than one system,
the result set will include a row for each
system. If those systems are of the same type
the client will consider that entry to be a
telepresence system with multiple codecs
rather than separate systems. If the systems
are of different types, then this sys_label
attribute will be included to differentiate the
systems.
✓
type The type of local address book entry. Possible
values are:
video, multicodec, phone, group
✓
site_sys_name The name of a site in a group. It is surrounded
by quotes if it contains spaces
✓
site_sys_label The label associated with a site name in a local
group. It is surrounded by quotes if it contains
spaces.
✓
codec:<1..4> If the entry is a telepresence system, each
codec will include a codec number attribute.
✓
h323_spd The preferred speed for an H.323 call to this
entry. If no speed is associated with the entry,
then the value of the configuration variable
globaladdrmaxh323 is returned. The default
is 384.
✓
h323_num H.323 address or alias. ✓
h323_ext H.323 extension or E.164 number. ✓
sip_spd The preferred speed for a SIP call to this entry.
If no speed is associated with the entry, then
this is the same as the h323_spd.
✓
sip_num IP address. ✓
xmpp_addr XMPP address, also known as the Jabber ID
(JID).
✓
Parameter Description
User
Accessible Additional Restrictions
To Next Page
Loading...
Need help?
General
