System Commands
Polycom, Inc. 168
mode Set the tracking mode for the Polycom
EagleEye Producer or EagleEye Director
camera.
EagleEye Director:
voice
- Camera tracking that switches to
room view before moving to the next
speaker.
director
- Direct Cut tracking that
positions the camera to move directly
from one speaker to the next.
EagleEye Director II and EagleEye
Producer:
group
- Camera tracking and framing
based on the Frame Group of
participants in the room.
speaker
- Camera tracking and framing
based on the Frame Speaker in the room.
EagleEye Producer:
groupwithtransition
- Camera
tracking and framing based on the Frame
Group with Transition of participants in
the room.
✓
participant Sets the Participant feature for the
Polycom EagleEye Producer camera to
enabled (
on
) or disabled (
off
).
✓
pip Sets the Picture in Picture setting of the
Polycom EagleEye Director II camera to
enabled (
on
) or disabled (
off
).
✟
speed Sets the rate at which a Polycom
EagleEye Director or Polycom EagleEye
Producer detects active speakers to
slow
,
normal
, or
fast
.
Camera tracking must be enabled.
✓
wake Sets the Auto Wake-up feature for the
Polycom EagleEye Producer camera to
enabled (
on
) or disabled (
off
).
To use these commands, you must go to
Admin Settings > System Settings >
Polycom Labs in the web interface and
enable the Auto Wake-up feature for the
EagleEye Producer camera.
✓
Parameter Description
User
Accessible Additional Restrictions
To Next Page
Loading...
Need help?
General
