System Commands
Polycom, Inc. 215
comm.Qos.tos.tosfecc,"3"
comm.Qos.tos.tosoam,"0"
comm.Qos.tos.tosvideo,"4"
location.country,"United States"
location.language,"ENGLISHUS"
pm.monRoleAuto,"True"
pm.monitor[1].enable,"True"
softupdate.url,"http://builds.softupdate.com/~test/softupdate /"
sourceman.camera[1].autowhitebalancegainb,"33"
sourceman.camera[1].autowhitebalancegainr,"37"
sourceman.camera[1].backlightcomp,"False"
sourceman.camera[1].brightness,"11"
sourceman.camera[1].contrast,"13"
sourceman.camera[1].name,"Main"
sourceman.camera[1].role,"People"
sourceman.camera[1].saturation,"6"
sourceman.camera[1].sharpness,"3"
sourceman.camera[1].videoquality,"Sharpness"
sourceman.camera[1].whitebalancemode,"atw"
video.monitor[1].Resolution,"1920x1080p 60Hz"
video.monitor[2].Resolution,"1920x1080p 60Hz"
exportprofile done
Comments
exportprofile done indicates that all the profile data has been exported.
When the system uses the Maximum security profile, this command is available only to administrators.
Do not use exportdirectory to interpret the data that is returned. Simply store and use the data as input
to the importdirectory command or import directory utility in the web interface. The format of the
exported directory data might change in future software releases and any application attempting to interpret
the data could find its ability to do so compromised in later releases of Polycom RealPresence Group Series
software.
Exporting a directory on one system model and importing the directory on another model is not supported.
Attempts to export and import directory information between different systems might also fail. The message
importdirectory failed indicates that the system was not able to import the information.
When importing directory data back into the system, use the data in its entirety (not edited in any form).
There is information that is used by the system to determine what type data (XML or CSV) is being imported.
To Next Page
Loading...
Need help?
General
