Room Integration
Polycom, Inc. 52
Connect a Polycom EagleEye Producer with a Polycom EagleEye IV Camera to a Polycom
RealPresence Group 700 System (Option 1):
Option 2
For installations requiring distances of farther than 10m between the EagleEye Producer and the system,
use the Polycom EagleEye Digital Extender. The EagleEye Digital Extender (part number 2215-64200-001)
supports distances from 3m to 100m.
Connect the camera and system using the following cables:
● Polycom EagleEye Digital Extender (includes a 1m HDCI Polycom EagleEye IV Digital Camera
Cable and a power source)
● HDCI Polycom EagleEye IV Digital Camera Cable
● A user-supplied CAT 5e or 6e or better solid conductor LAN cable. See http://hdbaset.org/cables for
recommended cables. For optional performance, CAT6A cable (CAT 6A F/UTP). This cable must be
terminated according to the TIA/ETAT 568B wiring standard. For EagleEye Digital Extender
installation recommendations and precautions, see Install the EagleEye Digital Extender.
● Another application is to use the Digital Breakout Adapter (DBA) with an HDCI Polycom EagleEye IV
Digital Camera Cable to connect the EagleEye IV camera to the codec. See Option 3.
2
4
1 2 3
3
1 2
100-240VAC 50/60Hz 2.3A
1
1