Instrument Function
R&S
®
SMB100A
100Operating Manual 1407.0806.32 ─ 21
●
Where you can find the description...
Since this section is relevant when an R&S SMZxxx frequency multiplier is connec-
ted, you can find a detailed description in the user manual of the frequency multi-
plier. It is included in the online help of the R&S SMB, but can also be found in pdf
format on the CD, or on the R&S website http://www.rohde-schwarz.com/product/
SMZ.html.
5.2.3.7 Display Update
The "Start/Stop Display Update" dialog provides the possibility to switch off update of
the displayed parameters in order to increase speed for certain settings.
The indicated values are not updated and may therefore differ from the intern, used
values.
Display Update is On/Off
Switches on/off update of the displayed parameters.
Switching off the update of the displayed parameters increases the speed for certain
settings.
Note: For optimum sweep performance with short dwell times and for fast settling
times, it is recommended to switch off the display update .
Remote command:
:SYSTem:DISPlay:UPDate on page 445
5.2.3.8 Selftest
A selftest is provided for service purposes.
Access:
1. Select "Setup > Test > Selftest"
2. Select "Start Selftest".
General Instrument Settings
To Next Page
Loading...
Need help?
General