Preparing for Use
R&S
®
SMB100A
48Operating Manual 1407.0806.32 ─ 21
● IP Configuration...................................................................................................... 48
● Advanced LAN Configuration..................................................................................48
● Ping Client...............................................................................................................49
● Web Control............................................................................................................ 50
● SCPI Remote Trace................................................................................................51
2.8.2.1 IP Configuration
The "IP Configuration" page displays all mandatory LAN parameters.
The "IP Address Mode" selects a configuration mode for the IP address of the
R&S SMB. With static configuration, the entered IP address, subnet mask, and default
gateway are used. With dynamic configuration, DHCP or dynamic link local addressing
(automatic IP) are used to obtain the instrument IP address.
See Chapter 2.6.2, "Assigning the IP Address", on page 36.
2.8.2.2 Advanced LAN Configuration
The "Advanced Config" page provides LAN settings that are not declared mandatory
by the LXI standard.
LXI Configuration
To Next Page
Loading...
Need help?
General