Remote Control Commands
R&S
®
SMB100A
311Operating Manual 1407.0806.32 ─ 21
:MMEMory:RDIRectory <Directory>
Removes an existing directory from the mass memory storage system. If no directory
is specified, the subdirectory with the specified name is deleted in the default directory.
Setting parameters:
<Directory> string
String parameter to specify the directory to be deleted.
Example: See "Working with Files and Directories" on page 304.
Usage: Event
:MMEMory:STORe:STATe <savrcl_state_nr>, <file_name>
Stores the current instrument setting in the specified file.
The instrument setting must first be stored in an internal memory with the same num-
ber using the common command *SAV.
Setting parameters:
<savrcl_state_nr> Corresponds to the specific <number> defined with the *SAV
command, e.g. *SAV 4.
<file_name> String parameter to specify the file name with extension
*.savrcltxt.
Example: See "Storing and Loading Current Settings" on page 304.
Usage: Event
Manual operation: See "Save" on page 128
7.11 OUTPut Subsystem
The OUTPut system contains the commands which set the properties of the RF output
connector.
The properties of the LF output connector are set in the SOURce:LFOutput Subsystem
system.
:OUTPut<hw>:AFIXed:RANGe:LOWer?........................................................................... 312
:OUTPut<hw>:AFIXed:RANGe:UPPer?............................................................................312
:OUTPut<hw>:ALC:SEARch:MODE.................................................................................312
:OUTPut<hw>:AMODe................................................................................................... 313
:OUTPut<hw>:FILTer:AUTO........................................................................................... 313
:OUTPut<hw>:FILTer[:LPASs]:STATe..............................................................................313
:OUTPut<hw>:IMPedance?.............................................................................................314
:OUTPut<hw>:PROTection:CLEar................................................................................... 314
:OUTPut<hw>:PROTection:TRIPped?..............................................................................314
:OUTPut<hw>[:STATe]...................................................................................................314
:OUTPut<hw>[:STATe]:PON........................................................................................... 315
OUTPut Subsystem
To Next Page
Loading...
Need help?
General