Preparing for Use
R&S
®
SMB100A
39Operating Manual 1407.0806.32 ─ 21
Default password
Remote-access and file access require the user "instrument" with default password
"instrument".
Changing the default user and security passwords
It is highly recommended to change the default user and security passwords in the
menu "Setup > Security" before connecting the instrument to the network (see section
Chapter 5.2.3.18, "Security", on page 114).
2.7.1 Using a Web Browser for Remote Access
The instrument can be remote-accessed via any web browser, as for example the Win-
dows Internet Explorer or Mozilla Firefox.
Alternatively, you can also make use of the LXI browser, as described in Chap-
ter 2.8.2.4, "Web Control", on page 50.
To remote access the instrument via a web browser:
1. Connect the instrument and the remote computer to a LAN, see Chapter 2.6.1,
"Connecting the Instrument to the Network", on page 35.
2. Instal the Java Runtime Environment JRE on the remote computer.
3. Type the instruments' IP address in the address field of the Web browser on your
PC, e.g. http://10.111.11.1
The "VNC Authentication" screen appears.
4. Enter the password and select "OK".
Remote Access via an External Controller
To Next Page
Loading...
Need help?
General