R&S SMB100A User Manual

Remote Control Commands
R&S
®
SMB100A
296Operating Manual 1407.0806.32 ─ 21
:HCOPy:DEVice:LANGuage <Language>
Selects the bitmap graphic format for the screenshot.
You can also retrieve the data using command HCOP:DATA?. This command is an
alias to command HCOPy:IMAGe:FORMat.
Parameters:
<Language> BMP | JPG | XPM | PNG
*RST: PNG
Example:
HCOP:DEV:LANG BMP
Selects bitmap as image format.
HCOP:FILE '/usb/HCopy'
Defines the directory, path and filename for storing the hard-
copy.
HCOP
Triggers the hardcopy generation.
Manual operation: See "File Options" on page 123
:HCOPy[:EXECute]
Triggers the generation of a hardcopy.
Example:
HCOP
Triggers the generation of a hardcopy of the current display.
Usage: Event
Manual operation: See "Save" on page 125
:HCOPy:FILE[:NAME] <Name>
Creates/selects a file into which the hardcopy is stored.
The path is specified together with the filename. Access to the file via remote control is
possible using the commands of the MMEM subsystem. In contrast, command
HCOPy:DATA? transfers the hardcopy contents directly to the remote client where they
can be further processed.
If automatic file naming is activated, the hardcopy is stored into a file with an automati-
cally generated name (commands HCOPY:FILE[:NAME]:AUTO:…).
Parameters:
<Name> string
Example:
HCOP:FILE:NAME '/usb/HCopy'
Defines the hardcopy filename.
Manual operation: See "File Info" on page 123
HCOPy Subsystem

R&S SMB100A Specifications

General

Brand	R&S
Model	SMB100A
Category	Inverter
Language	English