R&S SMB100A - Mmemory:mdirectory; Mmemory:move; Mmemory:msis

Remote Control Commands
R&S
®
SMB100A
310Operating Manual 1407.0806.32 ─ 21
<file_name> String parameter to specify the file name with extension
*.savrcltxt.
Example: See "Storing and Loading Current Settings" on page 304.
Usage: Setting only
Manual operation: See "Recall" on page 129
:MMEMory:MDIRectory <Directory>
Creates a subdirectory for mass memory storage in the specified directory. If no direc-
tory is specified, a subdirectory is created in the default directory. This command can
also be used to create a directory tree.
Setting parameters:
<Directory> string
String parameter to specify the new directory.
Example: See "Working with Files and Directories" on page 304.
Usage: Event
Manual operation: See "Create New Directory" on page 132
:MMEMory:MOVE <SourceFile>, <DestinationFile>
Moves an existing file to a new location or, if no path is specified, renames an existing
file.
Setting parameters:
<SourceFile> string
String parameter to specify the name of the file to be moved.
<DestinationFile> string
String parameters to specify the name of the new file.
Example: See "Working with Files and Directories" on page 304.
Usage: Event
SCPI confirmed
Manual operation: See "Rename " on page 132
:MMEMory:MSIS <Msis>
Defines the drive or network resource (in the case of networks) for instruments with
windows operating system, using msis (MSIS = Mass Storage Identification String).
Note: Instruments with Linux operating system ignore this command, since Linux does
not use drive letter assignment.
Usage:
SCPI confirmed
MMEMory Subsystem