R&S SMB100A - System:communicate:serial:baud; System:communicate:serial:parity; System:communicate:serial:resource

Remote Control Commands
R&S
®
SMB100A
442Operating Manual 1407.0806.32 ─ 21
Example:
SYSTem:COMMunicate:USB:RESource?
queries the VISA resource string for remote control via the USB
interface.
Response: "USB::72::000000::INSTR"
Usage: Query only
Manual operation: See "Visa Resource Strings" on page 110
:SYSTem:COMMunicate:SERial:RESource?
Queries the visa resource string for the serial remote control interface. This string is
used for remote control of the instrument.
Return values:
<Resource> string
Example:
SYSTem:COMMunicate:SERial:RESource?
queries the VISA resource string.
Response: "ASRL1::INSTR"
Usage: Query only
Manual operation: See "Visa Resource Strings" on page 110
:SYSTem:COMMunicate:SERial:BAUD <Baud>
Sets the baudrate for the serial remote control interface.
Parameters:
<Baud> 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200
*RST: 115200
Example:
SYSTem:COMMunicate:SERial:BAUD 115200
determines 115200 baudrate.
Manual operation: See "Baud Rate" on page 109
:SYSTem:COMMunicate:SERial:PARity <Parity>
Sets the parity for the serial remote control interface.
Parameters:
<Parity> NONE | ODD | EVEN
*RST: NONE
Example:
SYST:COMM:SER:PAR NONE
selects parity NONE.
Manual operation: See "Parity" on page 109
SYSTem Subsystem