R&S SMB100A - System:version

Remote Control Commands
R&S
®
SMB100A
447Operating Manual 1407.0806.32 ─ 21
Return values:
<Catalog>
Usage: Query only
Manual operation: See "Time Zone" on page 104
:SYSTem:VERSion?
Queries the SCPI version the instrument's command set complies with.
Return values:
<Version> string
Example:
SYST:VERS
queries the SCPI version.
Response: "1996"
The instrument complies with the SCPI version from 1996.
Usage: Query only
:SYSTem:OSYStem?
Queries the operating system of the instrument.
Return values:
<OperSystem> string
Example:
SYSTem:OSYStem?
Response: "Linux"
Usage: Query only
:SYSTem:MMEMory:PATH:USER?
Queries the user directory, that means the directory the instrument stores user files on.
Return values:
<PathUser> string
Example:
SYSTem:MMEMory:PATH:USER?
Response: "/var/user/"'
Usage: Query only
:SYSTem:WAIT <TimeMs>
Delays the execution of the subsequent remote command by the specified time.
This function is useful, for example to execute an SCPI sequence automatically but
with a defined time delay between some commands.
SYSTem Subsystem