R&S SMB100A - System:communicate:network:ipaddress; System:communicate:network:ipaddress:mode; System:communicate:network[:Ipaddress]:Dns; System:communicate:network[:Ipaddress]:Gateway

Remote Control Commands
R&S
®
SMB100A
439Operating Manual 1407.0806.32 ─ 21
Example:
SYSTem:COMMunicate:NETWork:COMMon:WORKgroup
'TEST_09'
sets the workgroup name
Manual operation: See "Workgroup" on page 105
:SYSTem:COMMunicate:NETWork[:IPADdress]:DNS <DNS>
Determines the net DNS server to resolve the name.
Parameters:
<DNS> string
Example: SYST:COMM:NETW:IPAD:DNS 123.456.0.1
Manual operation: See "DNS Server" on page 107
:SYSTem:COMMunicate:NETWork:IPADdress:MODE <Mode>
Selects manual or automatic setting of the IP address.
Parameters:
<Mode> AUTO | STATic
*RST: AUTO
Example:
SYSTem:COMMunicate:NETWork:IPADdress:MODE AUTO
the IP address is assigned automatically (DHCP)
Manual operation: See "Address Mode" on page 106
:SYSTem:COMMunicate:NETWork:IPADdress <IpAddress>
Sets the IP address.
Parameters:
<IpAddress> string
Range: 0.0.0.0. to ff.ff.ff.ff
Example:
SYSTem:COMMunicate:NETWork:IPADdress '7.8.9.10'
sets the IP address of the instrument.
Manual operation: See "IP Address" on page 106
:SYSTem:COMMunicate:NETWork[:IPADdress]:GATeway <Gateway>
Sets the IP address of the default gateway.
Parameters:
<Gateway> string
Range: 0.0.0.0 to ff.ff.ff.ff
SYSTem Subsystem