R&S SMB100A User Manual

Instrument Function
R&S
®
SMB100A
124Operating Manual 1407.0806.32 ─ 21
"Path..."
Selects the directory.
Note: To select the destination path, you have to specify a file name
as well. Otherwise an error message is displayed and the selection is
canceled.
Directory, path and file name are displayed in the infoline right to the
"Path" button.
Remote command:
:HCOPy:FILE[:NAME]:AUTO:DIRectory on page 297
:HCOPy:FILE[:NAME]:AUTO? on page 297
"Clear Path"
Deletes all image files with extensions bmp, img, png, xpm and csv
in the directory set for automatic naming.
Before deleting the image files a warning message is displayed
requiring the confirmation.
Remote command:
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar on page 297
"Prefix, Year,
Month, Day"
Determines the rules for "Automatic Naming".
Per default, the automatically generated file name is composed of:
<Path>/<Prefix><YYYY><MM><DD><Number>.<Format>, where
Y, M and D mean Year, Month, Day; Number is the "Current Auto
Number".
You can deactivate/activate each component separately.
The "Resulting File Name" indicates the current file name syntax.
Remote command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe on page 300
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix on page 300
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe on page 300
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe on page 299
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe on page 298
"Current Auto
Number"
Indicates the number which is used in the automatically generated file
name.
Note: When initially switching on the instrument the number is reset
to the lowest possible value. Starting with number 0 the output direc-
tory is scanned for already existing files. As long as files with the
same name are existing the number is increased by 1. The number is
automatically set so that the resulting file name will be unique within
the selected path. The current number is not in the save/recall file but
will be temporarily stored within the database. At following save oper-
ations the number is increased.
Remote command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer? on page 299
"Resulting File
Name"
Indicates the automatically generated file name.
Remote command:
:HCOPy:FILE[:NAME]:AUTO:FILE? on page 297
General Instrument Settings

R&S SMB100A Specifications

General

Brand	R&S
Model	SMB100A
Category	Inverter
Language	English