9. Lubricate the inner and outer surfaces of the bushings [C] with Barrierta S552R grease.
• If the bushings are warm, allow them to cool before applying the Barrierta grease. Applying the
grease while the bushings are hot could generate gas.
Important Notes about Fusing Unit Re-assembly
Follow these important guidelines when re-assembling the fusing unit:
• Use the external holes to fasten the screws when you fasten the lower guide plate. The inner screws
are adjusted to correct wrinkling.
• Handle the fusing lamps carefully to prevent breaking them; avoid touching them with bare hands.
• Match colors of the bayonet connectors with the colors of the terminals when reconnecting them to
the bracket at [A] and [B]. If either connection is incorrect, the machine cannot control the temperature
of the hot roller and an SC is logged as soon as the machine is powered on.
Fusing Unit
189
To Next Page
Loading...
