Ricoh MT-P2 - Page 304

<Engine>
1. Feed
4. Press .
<Engine>
2. Drum
5. Press [#Enter].
SP2001>>
Charge Roll Bi
6. Press  to display “Test T Pattern”
SP2902
Print T Pattern
7. Press [#Enter].
<Print Pattern>
*0:None
• The asterisk (*) denotes the current selection.
8. Press  to display the name of the pattern that you want to print.
<Print Pattern>
5:Grid Patttern
9. Press [#Enter] to mark the selection with an asterisk.
<Print Pattern>
*5:Grid Pattern
10. Press [Escape] twice.
<Engine>
2. Drum
The printer is now in the Test Pattern Print mode. To print the pattern, you must do SP5990.
Printing the Test Pattern
Do SP5990 to print the test pattern.
Service Program Mode
303
5