004 B5 SEF
005 DLT SEF
006 LG SEF
007 LT SEF
008 Custom Size
6114 [Folding Number] Set Number of Folding Roller Passes to Sharpen Crease
This SP sets the number of times the folding rollers are driven forward and reverse to sharpen
the crease of a folded booklet before it exits the folding unit of the Booklet Finisher. When
set at the default (0):
The folding blade pushes the center of the stack into the nip of the folding roller.
The folding rollers rotate ccw to crease the booklet, reverse cw, then rotate ccw again to
crease the booklet fold twice before feeding to the folding unit exit rollers.
[1~6/0/1]
0:2, 1:5, 2:10, 3:15, 4:20, 5:25, 6:30 (passes)
6115 [Pre-Stack Number] Number of Pre-Stack Sheets
This SP sets the number of sheets sent to the pre-stack tray. With this SP set to the default (3):
3 sheets are sent to the pre-stack tray.
When the 4th sheet feeds, the 4th sheet and 3 sheets from the pre-stack tray are sent to the
stapling tray together.
Note: You may need to adjust this setting or switch it off when feeding thick or slick paper.
[0~3/3/1]
0: None
1: 1 sheet
2: 2 sheets
3: 3 sheets
6116 [Staple Limit] Staple Limit Counter for Thick Paper
Multiply the normal limit by this number to limit the size of the stack for stapling thick paper.
[1~3/1 sheet]
5. Service Tables
380
To Next Page
