Ricoh MT-P2 - Page 430

5. Push [Esc].
SP5858-001
EngineSC Error
6. Repeat this procedure to select either 002 or 004.
Example 2: To set an SC code with 003
This example shows you how to enter "672" for SC672.
• For details about SC code numbers, please refer to the SC tables in Section "4. Troubleshooting".
7. Select "SP5858-003".
SP5858-003
Any SC Code
8. Push [#Enter].
0000000
_
9. Push [#Enter] to toggle the on the number display in the 2nd line.
0000000
0
10. Push  or  to display "2".
0000000
2
11. Push [#Enter] to enter the "2" in the line above.
0000002
_
12. Push  or  to move the cursor to the next digit.
. 0000002
_
13. Repeat Steps 2 to 6 to enter the "7".
Using the Debug Log
429
5