Ricoh MT-P2 - Page 431

. 0000072
_
14. Repeat Steps 2 to 6 to enter the "6".
. 0000672
_
15. Push [Esc] twice.
SP5858 >>
DebugSaveWhen
16. Do the next procedure to select one or more memory modules for the debug error data
recording.
To select one or more memory modules for recording in the debug log file
1. Select SP5859.
SP5859 >>
LogSaveKey No.
2. Push [#Enter].
SP5859
Key 1
3. Push [#Enter].
0000000
_
• The default settings for Keys 1 to 10 are all zero (“0”).
4. Select the number from the table below, then use these key presses to enter the number.
0002222
_
5. Service Tables
430
5