DISPLAY PANEL MANUAL
5-9
●The setting to use the special SPINDLE ASSEMBLY.
1) Select the “sp” at the end of models list on the SPINDLE SETTING screen (refer to Figure 5.2-4). The
following screen will be displayed when SET key is pressed.
Figure 5.2-5 SPECIAL TYPE SETTING
2) Move the cursor to the desired item using “∧∨“ touch keys. Then input the number using numeric input
keys.
Press EXEC to write new settings to the NUTRUNNER.
Press QUIT to cancel all new settings and return to the SYSTEM SETTING menu.
To Next Page
Loading...