SATO s86ex - ESC+D Barcode (Ratio 1:2))

95
59.1 Barcode
59.1 ESC+D Barcode (Ratio 1:2))
ESC+D
Hexadecimal
code
ESC
D
Parameter
<1B>
16
<44>
16
abbcccn～n
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specifying the barcode of narrow and wide bar width ratio 1:2.
[Format]
<D>abbcccn～n
●Parameter
a[Barcode symbology] = Refer to the table below.
b[Narrow bar width] = 01 to 36 dots
c[Height of barcode] = 001 to 999 dots
n[Print data] = Data
Barcode symbology (Ratio of module composition may not be available depending on the barcode symbology.)
A
Barcode symbology
Descriptions
Ratio
0
CODABAR (NW-7)
Set print data including Start/Stop Character.
Start/Stop Characters are [A,B,C,D,E,N,T,a,b,c,d,e,n,t]. However, the reading
result of
[E, N, T, a, b, c, d, e, n, t] will be [D, B, A, A, B, C, D, D, B, A.]
e.g.) When barcode print data is [123], specify [A123A].
Barcode character pitch is enabled.
Refer to the code list of the CODEBAR(NW-7) for the print data.
1:2
1
CODE39
Set print data including Start/Stop Character.
Start/Stop Character is [*].
e.g.) When barcode print data is [12345], specify [*12345*].
Barcode character pitch is enabled.
Refer to the code list of the CODE39 for the print data.
1:2
2
ITF
Specify print data in even-numbered digit.
If specifying in odd-numbered digit, “0” will be added to the head of print data.
Refer to the code list of the ITF for the print data.
1:2
3
JAN/EAN13
The barcode will have a guard bar and no HRI.
Refer to the code list of the JAN/EAN13 for the print data.
Fixed
4
JAN/EAN8
The barcode will have a guard bar and no HRI.
Refer to the code list of the JAN/EAN8 for the print data.
Fixed
5
Industrial 2of5
Barcode character pitch is enabled.
Refer to the code list of the Industrial 2of5 for the print data.
1:2
6
Matrix 2of5
Barcode character pitch is enabled.
Refer to the code list of the Matrix 2of5 for the print data.
1:2
H
UPC-A
The barcode will have a guard bar and no HRI.
Refer to the code list of the UPC-A for the print data.
Fixed
Barcode (Ratio 1:2)