SATO s86ex - Loading the Ribbon

30
20.1 Modification
20.1 ESC+/ Form Overlay Call
ESC+/
Hexadecimal
code
ESC
/
Parameter
<1B>
16
<2F>
16
(aa)
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set command is not maintained.
Valid range within item
The set command is in effect until a new specification is made.
Valid range between item
The set command is in effect until a new specification is made.
[Function]
Recalling the label image from the form overlay memory for printing.
[Format]
</>(aa)
●Parameter
a[Registration key] = Valid range : 01～99 (omissible)
[Coding Example]
<A>
</>01
<V>200<H>100<P>0<$>B,100,100,6
<$=>SATOPRINTER
<V>720<H>150<B>102100*95000012345*
<Q>2
<Z>
[Notes]
1. This command invokes the data registered by Registration of Form Overlay <&> to print.
2. When detecting this command in general print data, it will be combined with drawing stored in form overlay and printed.
3. Regarding the registration key specification, an error will not occur even the registration key is different because
the registration key is not checked.
Form Overlay Call