SATO s86ex - ESC+J Print of Journal

34
23.1 Modification
23.1 ESC+J Print of Journal
ESC+J
Hexadecimal
code
ESC
J
Parameter
<1B>
16
<4A>
16
a～a+CR<0D>
16
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specifying the print of the journal.
[Format]
<J>a～a+CR
●Parameter
a[Journal print column] = Print data
CR[Control code (0DH)]
[Coding Example]
<A>
<J>
ABCD+CR
EFGH+CR
<Z>
[Notes]
1. Starts journal print from vertical position of 2 dots and horizontal position of 2 dots.
2. Character pitch is set to 2 dots and line pitch is set to 16 dots.
3. Prints in 2 x 2 times of XS font.
4. Use of this command in combination with other commands excluding [Reprint <C>] and [Black and White Reverse Print <(>)
is invalid.
5. A line feed is inserted regardless the setting of the ignore CR/LF in this command.
Print of Journal