SATO s86ex - ESC+2 D50 Datamatrix (ECC200)

166
10.1 2D code
ESC+2D50 DataMatrix (ECC200)
10.1
ESC+2D50
Hexadecimal
code
ESC
2D50
Parameter
<1B>
16
<32>
16
<
44>
16
<35>
16
<30>
16
,aa,bb,ccc,ddd
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specify DataMatrix (ECC200).
[Format](setting part)
<2D50>,aa,bb,ccc,ddd
●Parameter
a[Horizontal cell size] = Valid range : 01 ～ 99(dots)
b[Vertical cell size] = Valid range : 01 ～ 99(dots)
c[Number of cells per line] = Valid range : 010～144
000 : Auto setting
d[Number of cell lines] = Valid range : 008～144
000 : Auto setting
[Format](data part)
<DN>mmmm,n～n
●Parameter
m[Number of data] = Valid range : 1~3116
n[Print data] = data
* Specify [7EH, 7EH] when printing 7EH.
* The code will not be printed when a parameter other than above is specified or number of print data does not match.
[Coding Example] Horizontal cell size: 3dots, Vertical cell size: 3dots
<A>
<V>100<H>200<2D50>,03,03,000,000
<DN>0010,0123456789
<Z>
[Notes]
1. The code will not be printed when a parameter other than above is specified or number of print data does not match.
2. Specify more than 2mm blank space around the DataMatrix code as a margin for scanner readability when specifying the
print format.
3. Specify [7EH, 7EH] when printing 7EH. The number of data is [0002].
4. When auto setting (000) is specified in the "number of cells per 1 line" and "number of cell lines", square DataMatrix is printed.
Data format
Number of data
Numeric
3116
Alphanumeric
2335
Binary(00H~FFH)
1556
DataMatrix (ECC200)