SATO s86ex - ESC+BJT True Type Font Call (Compatible Commands)

259
81.1 Memory Card
81.1 ESC+BJT True Type Font Call
(Compatible commands)
ESC+BJT
Hexadecimal
code
ESC
BJT
Parameter
<1B>
16
<42>
16
<4A>
16
<54>
16
,aa,bb,cc,dd,ee,ffff,n~n
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specifying to invoke True Type font.
[Format]
<BJT>,aa,bb,cc,dd,ee,ffff,n~n
●Parameter
a[Font ID] : 00 to 99
b[Horizontal magnification] : 01 to 12
c[Vertical magnification] : 01 to 12
d[Character pitch] : 01 to 99
e[Backup] : 00 Fixed
f[No. of print character] : 0000 to 9999
n[Data]
[Coding Example]
<A>
<V>100<H>200<CC>1
<BJT>,01,02,02,01,00,0004SATO
<Q>
<Z>
[Note]
Specify slot No. registered with Slot Card for Use <CC> prior to this command by all means.
[Important]
1.Do not turn the printer power off when accessing to the memory. When the printer power is off while memory accessing,
the data in the accessed media may be corrupted.
2.This command is compatible commands for the previous model. It is recommended to register with the dedicated tool,
and print with True Type font specification <RD> (or Call and Print of Font & Logo <RF>).
True Type Font Call
(Compatible commands)