SATO s86ex - ESC+$= Print of Outline Font

59
38.1 Font
38.1 ESC+$= Print of Outline Font
ESC+$=
Hexadecimal
code
ESC
$=
Parameter
<1B>
16
<24>
16
<3D>
16
n～n
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specifying the print outline font.
[Format]
<$=>n～n
●Parameter
n[Print data] = Data
[Coding Example] Print data: SATO
<A>
<V>100<H>100<P>2
<$>A,100,100,1<$=>SATO
<Q>2
<Z>
[Notes]
1. Specify Shape of Outline Font <$> prior to this command.
2. Font height specification includes ascender and descender areas. For proportional pitch, letter size width of outline font varies
depending on the individual font.
3. Use Character Pitch <P> to specify font pitch.
4. The shape of Italic font is inclined 15-degree within font width specification. Font height specification includes ascender and
descender areas.
5. If specified dots in 1 ~ 9 of [Font shape] are tiny, they may be unrecognizable as a font.
6. In the Shape of Outline Font <$>, font width and height specification up to 24 dots are printable; however, some fonts may be
unreadable because of character crowding.
[Valid Commands]
Print position
<V>
<H>
Modification
<P>
<%>
<F>
Font
<$>
Calendar
<WA>
<WU>
Print of Outline Font