21
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
The set parameter is in effect until a new specification is made.
The set parameter becomes the initial value at the next item
<A>.
[Function]
Specifying the counter-clockwise rotation of font and barcode. This is to rotate the print direction in 90º increments without
changing the location of the base reference point.
[Format]
<%>a
●Parameter
a[Rotative direction] = 0: Parallel 1 (0 degree)
1: Serial 1 (90-degree)
2: Parallel 2 (180-degree)
3: Serial 2 (270-degree)
[Coding Example] Font rotation: 180-degree, Barcode rotation: Parallel 1
<A>
<%>2
<V>100<H>400
<P>3<L>0403<X
M>ABCD
<%>1
<V>400<H>200<BD>103160*123*
<Q>2
<Z>
[Notes]
1. Position specification of Vertical Print Position <V> and Horizontal Print Position <H> are the absolute value from its base
reference point.
2. When the value of the parameter a is set to 4 to 9, the command error occurs and the command is ignored. When other than
number is specified, it is also ignored and the image is printed with Parallel 1(0 degree).
3. When printing with Serial 1(90 degrees) or Serial 2(270 degrees), design the narrow bar of the barcode bigger because it may
be blurred. When printing with Serial 1(90 degrees) and Serial 2(270 degrees), slow down the print speed.
[Valid Commands]
Rotation
point
point
point
point
To Next Page
Loading...
