SATO s86ex - ESC+RD True Type Font

61
39.1 Font
39.1 ESC+RD True Type Font
ESC+RD
Hexadecimal
code
ESC
RD
Parameter
<1B>
16
<52>
16
<44>
16
abb,ccc,ddd,n～n
abc,ddd,eee,n～n
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specifying CG font type, font style, font size, and print data.
[Format]
<RD>abc,ddd,eee,n～n
●Parameter
a[Font type] = A [CG Times]
B [CG Triumvirate]
C [SATOGAMMA] (Code page can be switched by ESC+CE command)
D [SATOVICA] (Code page can be switched by ESC+CE command)
E-Z,a-z TTF downloaded with the dedicate tool
b[Character set] = 0 (No specification for the character set(Fixed)) [Font type A or B].
Refer to the code page parameter in the next page. [Other than font type A or B]
c [Font style] = 0 [Standard]
1 [Bold]
2 [Italic]
3 [Bold+Italic]
d[Horizontal length] = 004 to 999 (dot specification)
P02 to P99 (point specification)
e[Vertical length] = 004 to 999 (dot specification)
P02 to P99 (point specification)
n[Print data] = Data
[Coding Example] Font type: CG Times
<A>
<V>100<H>100<P>2
<RD>A00,P10,P10,SATO
<Q>2
<Z>
[Notes]
1. Set font size in [dot specification] or [point specification].
2. Dot size varies depending on the head density. Refer to the table below.
Head density
1 dot size (mm)
8dots/mm (203dpi)
0.125
12 dots/mm (305dpi)
0.083
12 dots/mm (609dpi)
0.042
3. One point is 0.35mm.
4. When using TTF that is downloaded with dedicated tools, make sure to specify appropriate card slot with the command <CC>
before this command.
[Font size range]
Head density
Valid range (dots)
Horizontal line length
Vertical line length
8dots/mm (203dpi)
4 to 832
4 to 999
12 dots/mm (305dpi)
5 to 999
5 to 999
12 dots/mm (609dpi)
9 to 999
9 to 999
True Type Font