SATO s86ex - ESC+;D Print of Field

242
13.7 Memory Card
ESC+/D Print of Field
13.7
ESC+/D
Hexadecimal
code
ESC
/D
Parameter
<1B>
16
<2F>
16
<44>
16
,aa,n~n
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The set parameter is in effect until a new specification is made.
Valid range between item
The set parameter is in effect until a new specification is made.
[Function]
Invoking the items registered with Registration of Field and specifying data.
[Format]
</D>,aa,n~n
●Parameter
a[Field No. ] = Valid range : 1 to 99
n[Data] = Data to be changed
[Coding Example]
<A>
<CC>1
<YR>,1
</D>,1,DEF
</D>,2,78901
</D>,3,49000238
<Q>2
<Z>
[Notes]
1. Digit No. of print quantity is valid within the range specified with Registration of Field </N>.
2. When digit No. of this command is larger than the one specified with Registration of Field </N>, only the defined digit No. will
be available for printing.
3. Use this command and Format Call <YR> as a set.
4. The error occurs when unused or the slot which the printer is allocated is specified (Refer to Card Slot for Use <CC>).
[Important]
Do not turn the printer power off when accessing to the memory. When the printer power is off while memory accessing,
the data in the accessed media may be corrupted.
Print of Field