SATO s86ex - SNTP (Simple Network Time Protocol); Function; Operating Conditions

403
6.8 SNTP (Simple Network Time Protocol)
SNTP corrects time of the calendar IC when it is mounted.
In addition, Wireless LAN is not supported.
Function 6.8.1
This function acquires the current time from the NTP server and corrects time of the calendar IC at the printer power on when a
calendar IC is mounted on the printer and LAN is selected as [data port] at the [communication setting]. ENABLE/DISABLE the
SNTP and IP address setting of the NTP server can be done on the communication setting mode. This function is available only
when a calendar IC is mounted to the printer.
Operating conditions 6.8.2
The operating conditions of the SNTP function are as follows.
(1) A calendar IC is mounted to the printer.
(2) Communication setting is LAN.
* Select LAN at the [communication setting] - [data port].
(Refer to the communication settings of "Operational Manual” for more setting details.)
(3) Available only in the Normal mode.