SATO s86ex - ESC+V Vertical Print Position

16
7.1 Print Position
7.1 ESC+V Vertical Print Position
ESC+V
Hexadecimal
code
ESC
V
Parameter
<1B>
16
<56>
16
aaaaa
Initial value
aaaaa=1
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The set parameter is in effect until a new specification is made.
Valid range between item
The set parameter becomes the initial value at the next item
<A>.
[Function]
Specifying vertical print position from its start point by dot.
[Format]
<V>aaaaa
●Parameter
a[Vertical Print Position] = Refer to the table below.
[Coding Example] Vertical print position: 100 dots
<A>
<V>100<H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Notes]
1. Specifying the start of vertical position for the printing of text, barcode, ruled line and graphics.
2. When specifying “0” for print position, the operation is the same as when setting to “1”.
[Remark]
Any contents such as text, barcode and graphic exceed the printable area will not print.
[Initial Value and Valid Range of Parameter]
[S84-ex]
Head density
Initial value
Valid range (dots)
8dots/mm (203 dpi)
1
1 to 20000
12dots/mm (305 dpi)
1
1 to 18000
24dots/mm (609 dpi)
1
1 to 9600
[S86-ex]
Head density
Initial value
Valid range (dots)
8dots/mm (203 dpi)
1
1 to 9992
12dots/mm (305 dpi)
1
1 to 14988
[Valid Commands]
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<OA>
<OB>
<RD>
<$=>
<K1>
<K2>
<K8>
<K9>
<k1>
<k2>
<k8>
<k9>
<U>
<S>
<M>
<WB>
<WL>
<RG>
Barcode
<B>
<BC>
<BG>
<BI>
<D>
<D><d>
<BD>
<BT>
<BW>
<BP>
<BF>
<BS>
<BL>
<BL><d>
<BM>
2D code
<2D10>
<BK>
<2D12>
<2D20>
<BV>
<2D30>
<2D31>
<2D32>
<BQ>
<2D33
>
<2D50>
<BX>
<2D51>
Composite
symbol
<EU>
Modification
<WD>
<FW>
<(>
<RF>
<FC>
<FT>
<RM>
<%A>
<WS>
Graphic
<G>
<GM>
<GP>
Memory card
<GR>
<GC>
<PY>
Vertical Print Position