SATO s86ex - Software Specifications; Tcp;Ip; Lpd

400
6.3 Software Specifications
Available protocol: TCP/IP
Network layer: ARP, IP and ICMP
Session layer: TCP and UDP
Application layer: LPD, FTP, TELNET, BOOTP, DHCP, HTTP, SNMP, SNTP
1) LPR, FTP and dedicated socket protocol of TCP/IP are available for sending print data.
2) Dedicated socket protocol is available to obtain printer status.
3) SNTP, SNMP, TELNET are not supported with the wireless LAN.
6.4 TCP/IP
TCP/IP protocol environment has LPD and FTP for printing, and TELNET for setting each variables. You can use
BOOTP/DHCP for setting each address.
6.5 LPD
Protocol of LPD complies with RFC1179, and handles the list of logical printer name as a cue name. The cue name has 3
names: lp, sjis, euc
Cue name
Kanji filter
Kanji code
Supporting interface
[○：supported, ×：not supported]
LAN
Wireless LAN
lp
None
N/A
○
○
sjis
None
N/A
○
-
euc
None
N/A
○
-
Order of sending of data file and control file doesn’t affect print operation when sending job with LPR.
* Deleting job with LPR is not available.
* LPD specification is only available in Status 4/ENQ response.
* When conducting large quantity printing with LPR, some data may be skipped because of the specification of Windows.
* Banner page printing is not available.
* Note that establishing multiple session at the same time is not available.