SATO s86ex - Timing Chart of Single Item Receive

364
Timing chart of single item receive 3.3.3
1) Normal process
2) Error process
Printer Status
Note: the printer will be polled by XON at intervals of 500 msec from the initializing to the first data reception.
Printer
Power On
RD
SD
Initializing
STX.ETX (2)
Receive/Analysis/Edit
Printing (1)
Onlin
e
Offline
Printing (2)
Press the LINE
Press the LINE key
Receive/Analysis/Edit (1)
STX.ETX (1)
XON
XON
XOFF
XOFF
XO
N
XO
N
500 msec
XOFF
Onlin
e
Printer Status
Printer
RD
SD
Printing (1)
Online
Head open
Paper end error
Offline
Press the LINE key
Receive/Analysis/Edit (1)
STX . . . . . . . . . . . . . . . . . . . . ETX (1)
Printing (2)
XON
XOFF
XON
Head Press the LINE key
* When the paper end error occurs, open the head, set label, close the head and feed.
Notes: (1) The paper end error will be released when the head is closed.
(2) XOFF will be sent when data is received during an error.
*
XOFF
Online
Offline