SATO s86ex - CRC Errors

424
7.6 CRC errors
The printer calculates the CRC of every items of received data and checks the validity of the received data by comparing it
with the CRC in the received data. When the calculated CRC is not the same as the CRC in the received data, the printer
judges the data is incorrect, arises CRC error and stops printing.
The LCD display of CRC error
There are 3 ways to release the CRC error.
(1) Press the LINE key
: the printer will resume the printing from the print data with the CRC error.
(2) Send CAN command
: the printer will clear all contents in the receive buffer including the print data with the CRC
error.
(3) Press the CANCEL
key
: the printer will cancel the print data with the error and resume the printing from the next
print data.
[Supplemental explanation]
1. The return status of the Status 3 and 4 at the CRC error will be "other errors".
2. The error will not be displayed at the CRC time out error.
* The CRC error will be detected only when the CRC check is enabled.
CRC CHECK ERROR