SATO s86ex - ESC+* Memory Card Clear

257
13.20 Memory Card
ESC+* Memory Card Clear
13.20
ESC+*
Hexadecimal
code
ESC
*
Parameter
<1B>
16
<2A>
16
a,bb
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Clearing the entire contents in memory card.
[Format]
<*>a,bbb
●Parameter
a[Item to be cleared] = G : SATO Graphic
(Clearing graphic registered with Registration of Graphic <GI>)
P : PCX file
(Clearing PCX file registered with Registration of PCX File <PI>)
M : BMP file
(Clearing BMP file registered with Registration of BMP File <GT>)
F : Format
(Clearing format registered with Registration of Format <YS>)
O : True Type font
(Clearing True Type font registered with Registration of True Type Font <BJ>)
R : Form Overlay
(Clearing form overlay registered with Registration of Form Overlay <&S>)
b[Registration No.] = 000 to 099 (Omissible) True Type font
00001 to 99999(Omissible) Format
001 to 999 (Omissible) Other than above
(When omitting Registration No., all the registered data will be cleared.)
[Coding Example 1] Clearing 001 of SATO graphics
<A>
<CC1>
<*>G,001
<Z>
[Coding Example 2] Clearing 002 of PCX files
<A>
<CC1>
<*>P,002
<Z>
[Coding Example 3] Clearing Form Overlay entirely
<A>
<CC1>
<*>R
<Z>
[Notes]
1. Delimit Start of Data Transmission <A> and End of Data Transmission <Z> with this command for use.
2. Specify slot No. of Card Slot for Use <CC> prior to this command when using.
[Remark]
To clear all data of memory card, use Card Format <BJF>.
[Important]
Do not turn the printer power off when accessing to the memory. When the printer power is off while memory accessing,
the data in the accessed media may be corrupted.
Memory Card Clear