250
ESC+T1 Memory card 16×16 dots
External Font Registration
Valid range and
term of
command
When the power switch is OFF
The registered data becomes valid.
The parameter preset will be invalid.
The parameter preset will be invalid.
[Function]
Register 16x16 dots external characters to the memory card.
[Format]
<T1>abbn~n
●Parameter
a[Select register data type] = H : HEX character
B : Binary code
b[Register font code address] = H : in the range from “21” to “7F”, up to 95 items can be registered
B : in the range from 21H to 7FH, up to 95 items can be registered
n[External character registration data]
[Coding Example]
<A>
<CC>1
<T1>H2100FF00FF～3C0000FF
<Z>
[Notes]
1. It is possible to overwrite the data that is registered once.
2. Make sure to specify the slot number used for card slot command <CC> before the memory card 16x16 external character
registration command <T1>.
3. The error may occur when other registration command and the memory card 16x16 external character registration command
<T1> at the same time due to not enough memory in the memory card. As a countermeasure, register other registration to
another memory card or use a memory card that has more capacity.
4. The output order of the data is as follows.
5. The error occurs when unused slot is specified.
External file [16x16]
When registering the above external character, D1 data are <01>
16
, D2 data are <80>
16
because the constitution of D1 is
[00000001], and D2 is [10000000].
In the same manner, D3 is <03>
16
, D4 is <00>
16
, D5 is <3F>
16
, D6 is <FC>
16
, and the external registration data will be
<018003003FFC.....>
16
up to D32.
[Important]
Do not turn the printer power off when accessing to the memory. When the printer power is off while memory accessing, the
data in the accessed media may be corrupted.
Memory card 16x16 dots
External Font Registration
To Next Page
Loading...
