SATO s86ex - ESC+WU Extended Calender Print

264
14.4 Calendar
ESC+WU Extended Calender Print
14.4
ESC+WU
Hexadecimal
code
ESC
WU
Parameter
<1B>
16
<57>
16
<55>
16
a
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specify calender print.
[Format]
<WU>a
●Parameter
a[Print contents] = YYYY(Year) Valid range : 1981-2080
YY(year) Valid range : 00-91
Y(year) Valid range : 0-9
MMM(Abbreviation of month ) Valid range : Jan-Dec
MM(Month) Valid range : 01-12
M(Month) Valid range : A-Z,a-z
DDDDDDDDD(Day) Valid range : Sunday-Saturday
DDD(Abbreviation of day) Valid range : Sun-Sat
DD(Date) Valid range : 01-31
D(one character day code) Valid range : 0-9,A-Z,a-z
HH(Hour) Valid range : 00-11
GG(Hour) Valid range : 01-12
hh(Hour) Valid range : 00-23
mm(Minuit) Valid range : 00-59
ss(Second) Valid range : 00-59
TT(Morning/Afternoon) Valid range : AM/PM
JJJ(Julian Date) Valid range : 001-366
WW(Week) Valid range : 00-52
ww(Week) Valid range : 01-53
QQ(Time) Valid range : 01-96（1=15 minutes: 96=24 hours）
C(Shift code) Valid range : 1-3
Control code >Z...>Z
[Coding Example1] Print the date of 3 months later from the current date
<A>
<WP>M03
<V>100<H>200
<OB><WU>>ZDD/MM/YY hh:mm>Z
<Q>2
<Z>
[Coding Example2] Print "DATE" and the current date
<A>
<V>100<H>200
<OB><WU>DATE:>ZDD/MM/YY hh:mm>Z
<Q>2
<Z>
Extended Calendar Print