SATO s86ex - ESC+WL WL Font (Default Font Size: 28×52 Dots)

87
56.1 Font
56.1 ESC+WL WL Font (Default Font Size:
28×52 dots)
ESC+WL
Hexadecimal
code
ESC
WB
Parameter
<1B>
16
<57>
16
<4C>
16
an～n
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specifying the character in default font size of W28 x H52 dots.
[Format]
<WL>an～n
●Parameter
a[Smoothing] = 0 : Smoothing disabled
1 : Smoothing enabled
(When Enlargement <L> rate is between 3 and 12)
n[Print data] = Data
[Coding Example]
<A>
<V>100<H>200<P>2<L>0304<WL>0ABCDE
<Q>2
<Z>
[Notes]
1. Only the fixed pitch is available for WL font.
2. Even the smoothing is enabled, it will be invalid when enlargement <L> is specified for 1 time, 2 times, and 13 to 36 times.
[Valid Commands]
Print position
<V>
<H>
Modification
<P>
<L>
<%>
<F>
<&>
</>
<O>
<WD>
<WS>
Barcode
<D><d>
<BL><d>
Calendar
<WA>
<WU>
WL Font
(Default Font Size: 28×52 dots)