SATO s86ex - SNMP Specification (Simple Network Management Protocol)エラー! ブックマークが定義さ れていません

406
6.10 SNMP specification (Simple Network Management Protocol)
SNMP is a function to disclose the printer information to the IP network. It is possible to monitor the printer status via network.
Supported MIB 6.10.1
The printer information is kept as a Management Information Base format called MIB. Each nodes on the tree have numbers, and
SNMP manager send a node number to the printer acquire information of the node as information acquiring request. The printer
returns the information of specified node number as response data.
MIBs that the printer supports are as follows;
・system(1)
・interface(2)
・address translation(3)
・ip(4)
・icmp(5)
・tcp(6)
・udn(7)
・transmisson(10)
・snmp(11)
・igmp(85)
・host(25)
・printerMIB(43)