SATO s86ex - ESC+KS Kanji Font Type

43
29.1 Modification
29.1 ESC+KS Kanji Font Type
ESC+KS
Hexadecimal
code
ESC
KS
Parameter
<1B>
16
<4B>
16
<53>
16
ab
Initial value
a=31H, b=31H
Valid range and
term of
command
When the power switch is OFF
The set parameter is maintained.
Valid range within item
The set parameter is in effect until a new specification is
made.
Valid range between item
The set parameter is in effect until a new specification is
made.
[Function]
Specify the Kanji font type used for the Kanji print command.
[Format]
<KS>ab
●Parameter
a[Kanji font type] = “3”(33H) :GB18030 (Default)
“5”(35H) :KSX1001
“6”(36H) :BIG5
b[Font] = “1”(31H) : Mincho (Default)
“2”(32H) : Gothic
[Coding Example] Set Mincho with GB18030
<A>
<KS>31
<Z>
[Notes]
1.When the font specified by this command is not supported, available font for every Kanji font is printed.
2.Unused value for the parameter "a" is reserved for Japanese.
3.Use this command solely together with <A> and <Z>.
Kanji Font Type