SATO s86ex - Esc+D~Esc+D Barcode (Selection of HRI)

97
60.1 Barcode
60.1 ESC+D~ESC+d Barcode (Selection
of HRI)
ESC+D
~ ESC+d
Hexadecimal
code
ESC
D ~ d
Parameter
<1B>
16
<44>
16
~ Character type
abbcccn~n + <d>n~n
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Specifying character type of human readable information (HRI) for barcode.
[Format]
<D>abbcccn~n + <d>n~n
●Parameter
a[Barcode symbology] = 3 : JAN/EAN13
4 : JAN/EAN8
H : UPC-A
b[Narrow bar width] = Valid range : 01 to 36 dots
c[Height of barcode] = Valid range : 01 to 999 dots
n[Print data] = Barcode data
d[Character type specification] = OA
OB
XU
XS
XM
XB
XL
U
S
M
WB
WL
n[Print data] = HRI data
[Coding Example] Barcode symbology : EAN13 Narrow bar width : 03 Height of barcode: : 120
Barcode data : 4902471000793 Character type : XU
HRI data : 4902471000793
<A>
<V>100<H>200<D>3031204902471000793
<XU>4902471000793
<Q>2
<Z>
[Notes]
1. Adds HRI with specified character type.
2. When the data other than specified value is set, printing will not be performed. When the barcode enlargement ratio is small
and character type is large, HRI may be overlapped with each other.
3. The printer will lay out HRI properly.
4. HRI for JAN/EAN8, JAN/EAN13 and UPC-A requires the following terms.
For 8 dots/mm (203 dpi), [02] and [03] would be a proper value of narrow bar width.
For 12 dots/mm (305 dpi), [03] and [04] would be a proper value of narrow bar width.
For 24 dots/mm (609 dpi), [06], [07] and [08] would be a proper value of narrow bar width.
5. HRI will not be printed when barcode is an error for barcode with HRI.
6. When <P> or <L> is specified(<P>02<d>n～n、<L><d>n～n), HRI will not be printed.
Barcode (Selection of HRI)