SATO s86ex - ESC+IB Internal Buffer Recall

272
15.4 Intelligent Command
ESC+IB Internal Buffer Recall
15.4
ESC+IB
Hexadecimal
code
ESC
IB
Parameter
<1B>
16
<49>
16
<42>
16
aa(,aa,aa･･･)
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set parameter is not maintained.
Valid range within item
The parameter preset will be invalid.
Valid range between item
The parameter preset will be invalid.
[Function]
Recall the data stored in the internal buffer to be used as character strings or print data for the barcode.
[Format]
<IB>aa(,aa,aa･･･)
●Parameter
a[Internal buffer number] = Valid range : 1 ～ 16
It is possible to combine multiple data by delimiting with comma and specifying them.
[Coding Example] Print JAN13 by using the internal buffer data
Original data
<A>
<V>100<H>100
<IB>1,2,3
<BD>304120
<IB>6
<Q>
<Z>
Data after processing
<A>
<V>100<H>100
<BD>304120491234561234
<Q>0010
<Z>
The registered data 1, 2, and 3 are combined and used as the barcode
data in the above example.
[Notes]
1. The stored data is cleared when the printer power is off.
2. Refer to the table on the next page for the command that can be replaced for the print data and parameters.
3. Specify the internal buffer recall command <IB> before the command replaced for the data.
4. The internal buffer recall command <IB> is valid only when the data and parameter of the command to be replaced are
not specified. The replacement of data by the internal buffer data recall command <IB> will not be done when
parameter is specified for the command to be replaced.
5. The maximum 1024 bytes of the internal buffer data for one time can be recalled.
6. It is possible to specify the same internal buffer number repeatedly in the command.
Internal Buffer Recall
4
12345
0010
Internal buffer
No
Item name
Number
of digits
Data contents
01
DATA1
2
49
02
DATA2
6
123456
03
DATA3
4
1234
04
0
05
0
06
QTY
4
0010
07
0
08
0
09
0
10
0
11
0
12
0
13
0
14
0
15
0
16
0
1234