SATO s86ex - Timing Chart

375
Timing Chart 3.6.3
1) Normal process
2) Cancel process
Status
ACK
Status
Status
Note: When the cancel request command has sent, wait more than 500 msec before sending the next data.
Avoid sending CAN while sending the print data (STX <A> - <Z> ETX). With the above condition, the job may be
canceled or the item may not be printed correctly.
Printer
RD
SD
Printing (1)
Online
CAN
Receive/Analysis/Edit (2)
Printing (2)
Printer Status
Receive/Analysis/Edit (1)
STX . ETX (1)
STX . ETX (2)
ENQ
ACK
ENQ
Status
ENQ
ACK
500 msec
ENQ
Note: Avoid sending ENQ while sending the print data (STX <A> - <Z> ETX).
This may cause return status error or print error. or there may be print error.
Power On
Printer
RD
SD
Initializing
Receive/Analysis/Edit (2)
Printing (1)
Online
Receive buffer
near full state
Receive buffer
near full release
Offline
Printing (3)
Printer Status
Press the LINE key
Press the LINE key
Receive/Analysis/Edit (1)
STX . ETX (1)
STX . . ETX (3)
Receive/Analysis/Edit (3)
ENQ
ACK
ENQ
Status
ENQ
ACK
Status
ENQ
Status
ACK
Status
ENQ
Status
STX . ETX (2)
Printing (2)