SATO s86ex - Loading the Ribbon and Media

29
19.1 Modification
19.1 ESC+& Registration of Form
Overlay
ESC+&
Hexadecimal
code
ESC
&
Parameter
<1B>
16
<26>
16
(aab～b)
Initial value
Nil
Valid range and
term of
command
When the power switch is OFF
The set command is not maintained.
Valid range within item
The set command is in effect until a new specification is made.
Valid range between item
The set command is in effect until a new specification is made.
[Function]
Storing a label image in the volatile form overlay memory.
[Format]
<&>(aab～b)
●Parameter
a[Registration key] = Valid range : 01～99 (omissible)
b[Comment] = Maximum 16 bytes (omissible)
[Coding Example]
<A>
<V>100<H>50<FW>1010V800H750
<V>100<H>50<FW>0505V760H710
<V>150<H>100<XB>0MODEL
<&>01DATA1
<Z>
[Notes]
1. This command saves fixed print contents to a CF card in the printer and then, Form Overlay Call </> combines the contents
with drawing of general data to print out.
2. Specify this command at the end of data string that is to be stored. Drawing valid range in form overlay registration is same as
printable area.
3. Only 1 format can be registered with the form overlay registration <&>. Any code in the valid range (01-99) can be specified
for the registration key.
4. To change the stored data, specify Form Overlay Clear <*&>, and then register new data.
5. Invoke stored data by Form Overlay Call</>.
6. When specifying Label Size <A1>, it will be extracted in the specified area.
[Valid Commands]
Print position
<V>
<H>
Font
<XU>
<XS>
<XM>
<XB>
<XL>
<OA>
<OB>
<RD>
<$=>
<K1>
<K2>
<K8>
<K9>
<k1>
<k2>
<k8>
<k9>
<U>
<S>
<M>
<WB>
<WL>
<RG>
Barcode
<B>
<BC>
<BG>
<BI>
<D>
<D><d>
<BD>
<BT>
<BW>
<BP
<BF>
<BS>
<BL>
<BL><d>
<BM>
<BM>
2D code
<2D10>
<BK>
<2D12>
<2D20>
<BV>
<2D30>
<2D31>
<2D32>
<BQ>
<2D33>
<2D50>
<BX>
<2D51>
Composite
symbol
<EU>
Modification
<WD>
<FW>
<(>
<RF>
<RM>
Graphic
<G>
<GM>
<GP>
Registration of Form Overlay